Get A Quote
HP · Color Multifunction

HP DesignJet T2530 Multifunction Printer Series

Previous-gen 36-in wide-format MFP for CAD/GIS workgroups. Integrated 36-inch single-pass CIS scanner, dual-roll inkjet plotter, A1 plots in 21 seconds, 120 A1/hour, 2400 x 1200 dpi, HP 727 ink set, 15.6-inch color touchscreen.

5 · 3 verified reviews · Read reviews
Print speed
2.9 ppm color
Paper capacity
50 sheets
Duplex
Single-sided (Simplex)
Connectivity
USB · Wi-Fi · Ethernet
Get a quote Buy supplies Call (386) 261-8323
Free delivery 24-hr quote turnaround Authorized HP reseller Lease or buy outright
In stock
HP HLL9310CDW
Authorized HP reseller Free shipping to 50 states 1-year manufacturer warranty Install guidance by phone 30-day return policy
Is this the right printer for you?

Who the HP DesignJet T2530 Multifunction Printer Series is actually for

Most printer pages just tell you what a printer does. Here's the honest version: when this machine is the right choice, when it's fine, and when you should look at something else. We sell a lot of these for a reason, but the reason is not "every office."

Best fit

Pick this if...

  • You're a mid-to-large architecture, engineering, or GIS firm (10-40 seats) that needs in-house print + scan + copy on the same wide-format chassis.
  • You print 50-200 A1 plots per day and scan 5-20 large originals daily through the integrated 36-inch CIS scanner.
  • You scan to multiple destinations — email, network folder, USB stick, FTP, or directly to the printer HDD for reprint.
  • You need dual-roll auto-switching standard — both rolls live in the chassis, the printer picks the right paper for each job.
  • You need PostScript for AutoCAD, Adobe, or RIP workflows — pick the PS variant (L2Y26A).
Works fine

You'll be happy if...

  • You print up to ~250 A1 plots a day — the engine handles it; HP 727 ink cartridges (40-ml to 300-ml) keep per-page cost reasonable.
  • You can live with the 15.6-inch touchscreen — it's bigger than the T1600 4.3-inch panel; operators love it for scan preview.
  • You're replacing a T1600 + standalone scanner — the integrated MFP saves desk space and unifies workflows.
  • You scan mostly grayscale technical drawings — 25.4 cm/sec grayscale at 200 dpi keeps a stack of as-builts moving.
  • You're stepping up from a T2300 — operators adapt quickly; HP Click and project-set workflows carry over.
Look elsewhere

Skip this if...

  • You only need print, no scan/copy — don't pay for the MFP. The T1600 / T1600DR is the print-only equivalent at lower cost and smaller footprint.
  • You need 44-inch output or scan — this caps at 36-inch. The HD Pro / HD Pro 2 MFP handles 44-inch.
  • You scan high volumes of high-resolution color photos — 600 dpi CIS is right for technical drawings, less so for fine-art reproduction. The HD Pro CCD scanner is sharper.
  • You don't have the floor space — measure carefully; this is a wide MFP chassis with both rolls and the integrated scanner bridge.
  • You're shopping new — the T2600 is the current-gen successor with a refreshed UI, faster scan, and the same 36-inch class. T2530 is largely refurbished/replacement market now.
Full specifications

Every spec, no guessing

The HP DesignJet T2530 36-in MFP is HP's previous-gen wide-format CAD/GIS multifunction printer — a 36-inch dual-roll inkjet printer with an integrated 36-inch single-pass CIS color scanner, built for mid-to-large architecture, engineering, and GIS firms (10-40 seats) that want print + scan + copy on one chassis. It prints A1/D pages in 21 seconds (mechanical), around 120 A1 prints per hour, at up to 2400 x 1200 optimized dpi using HP Thermal Inkjet and the HP 727 ink cartridge family (40-ml to 300-ml). Scanner resolution is 600 dpi, scanning at 7.6 cm/sec color or 25.4 cm/sec grayscale, with scan destinations to email, network folder, USB, printer HDD, or FTP. Dual roll is standard (both rolls live in the chassis, with auto-switching by paper type or width). Connectivity is Gigabit Ethernet (1000Base-T) plus Hi-Speed USB 2.0; Wi-Fi optional. The PS variant (L2Y26A) ships with native PostScript drivers. The 15.6-inch color touchscreen handles scan preview, copy editing, media-roll management, and project-set workflows. The thing buyers regret: ordering this when the T2600 was already shipping. The T2600 is the direct successor with a refreshed UI, faster scan, and the same 36-inch class — for new purchases get the T2600. The T2530 is the right buy on the refurbished/replacement market or where existing fleets standardize on it.
Get a quote on this model Compare other printers
Print
Print technology Multifunction
Print speed (mono) Up to 2.9 pages per minute
Print speed (color) Up to 2.9 pages per minute
Duplex printing Single-sided (Simplex)
Print resolution Up to 2,400 × 1,200 dpi
First page out < 21 seconds
Copy & Scan
Capability Color Multifunction
Duplex copy / scan Single-sided (Simplex)
Scanner type
Scan resolution (optical) Up to 2,400 × 1,200 dpi
Scan destinations
Paper
Paper capacity 50 sheets
Paper size A4/Letter · A3/Tabloid · A2 · A1 · A0 · 36-inch
Recommended monthly volume 0 pages
Max monthly duty cycle
Connectivity
Wired Gigabit Ethernet (10/100/1000)
USB USB for charging, data transfer, and OTG support
Wireless Wi-Fi 802.11b/g/n/ac/ax
Physical & power
Form factor Plotter
Usage class Production
Manufacturer HP
Model HLL9310CDW
How you can buy this printer

Buy it, lease it, or just reorder supplies

Three ways to get this printer, each priced to match how you actually use it. Most small offices lease because toner and maintenance are bundled. If you know what you need, buy outright. If you already own one, just reorder supplies.

Buy outright
One-time payment · yours to keep
Custom quote
Free delivery · 1-yr warranty
  • Machine is yours the day it arrives
  • 4,500-page starter toner included
  • 1-year HP manufacturer warranty
  • Install help by phone or remote session
  • Order your own toner when the starter runs out
Request purchase quote →
Most small offices
Lease & bundle
36- or 60-month term · toner included
Custom lease quote
Flexible terms · tailored to your volume
  • Printer + unlimited toner bundled
  • Maintenance and parts included
  • Upgrade to a bigger machine anytime
  • Typical lease payment is tax-deductible
  • One predictable monthly bill instead of surprise toner orders
Request lease quote →
Supplies only
Already own one? Just reorder.
Request pricing
Genuine Brother TN830 / TN830XL
  • Genuine Brother TN830 toner (standard yield, ~1,200 pages)
  • Genuine Brother TN830XL toner (high yield, ~4,500 pages)
  • Genuine Brother DR810 drum unit when it's time
  • Free shipping on qualifying orders
  • Auto-reorder option so you never run out mid-job
Order supplies →

Final lease rate depends on term length, credit profile, and bundled supplies. Outright purchase and supplies pricing varies with bundled warranty, install packages, and order volume. Request a quote for exact pricing.

Included with every order

What ships with the HP DesignJet T2530 Multifunction Printer Series

The printer itself

HP DesignJet T2530 Multifunction Printer Series in original HP packaging. Plotter form factor, roughly 55.1 x 36.1 x 43.7 inches

Starter toner

Includes a high-capacity starter supply, giving you about 3 to 6 months of use before you have to think about your next order.

Setup documentation

HP quick-start card, power cord, USB cable (use Wi-Fi or Ethernet for multi-user), and a link to driver downloads.

Setup call (if you want it)

Book a 20-minute setup call with our team. We'll walk through network config, driver install, and first print. No extra cost, no sales pitch.

Supplies & consumables

Toner, yields, and what to actually reorder

The #1 question we get on this printer is "which toner do I buy?" Short answer: you have two cartridge options and a drum. Standard yield TN830 covers roughly 1,200 pages. High yield TN830XL covers roughly 4,500 pages and is the better value for most offices. Pick XL unless you print very little.

The drum unit (DR810) is separate and usually lasts 15,000 to 30,000 pages before it needs replacing. At a typical small office volume, expect to change it once every 2 to 4 years.

If you lease this printer through us, toner and drum are included. You never pay for supplies separately. That's usually the better deal once you add up real costs over 3 years.

TN830

Standard-yield toner

About 1,200 pages · fits all L2700 / L2750 / L2759 series

Quote
each
TN830XL

High-yield toner BEST VALUE

About 4,500 pages · recommended for most offices

Quote
each
DR810

Drum unit

15,000–30,000 pages · replace every 2–4 years · separate from toner

Quote
each
Request bulk supplies pricing →
5.0
★★★★★
Based on 3 verified customer reviews

Verified means the customer bought this exact model from us. We don't publish paid or incentivized reviews.

What customers actually say

The 5-star consensus: "it just works"

Small sample size, high signal. The 3 verified reviewers picked this model to replace older inkjets or aging HP machines. Common threads in the feedback:

  • ★ "Got this for our small architecture firm about a year ago. The 24-inch prints come out clean and the scanner function saves us time on document management. Haven't had any major issues with it yet."
  • ★ "It's a solid workhorse for engineering drawings and PDFs. Color accuracy is decent, though the ink costs add up if you're printing a lot. Would have gone with something cheaper if we didn't need the multifunction aspect."
  • ★ "Using this for CAD output at my home office. The roll feed option is really convenient and the automatic sheet cutter works well. Setup took a bit longer than expected but it's been reliable since."

Five reviews is a small sample. Want to see hundreds of reviews across our whole catalog? We have a 5.0 average on Google across 1,240+ reviews and an A+ BBB rating. Linked below.

Better Business Bureau
A+ BBB rated
Accredited business
★★★★★
5.0 on Google
1,240+ reviews
G2 verified vendor
G2 verified
Vendor profile
Free quote · no obligation

Get a quote on the HP DesignJet T2530 Multifunction Printer Series

Tell us how you want to pay (outright, lease, or supplies only) and what volume you run. You'll get a line-item quote back within one business day, from a specialist who actually works on these machines, not a general sales rep.

  • Real pricing, no runaround. Upfront monthly lease rate or outright price, plus shipping and any install add-ons itemized.
  • One business day turnaround. Quotes land in your inbox within 24 hours. Often faster.
  • No credit pull until you say yes. We don't ping your credit to give you a quote. Only if you sign.
  • Volume & bundled supplies. Tell us your monthly print volume and we'll price toner bundling so you don't get surprised.
FAQ

HP DesignJet T2530 Multifunction Printer Series, common questions

The questions we get asked most often on this model. If yours isn't here, call (386) 261-8323 and get an answer in about 30 seconds.

The HP DesignJet T2530 Multifunction Printer Series does not use toner; it is an inkjet printer that uses HP 727 ink cartridges. It supports high-yield 300ml cartridges for all six colors (matte black, photo black, gray, cyan, magenta, yellow), as well as standard 130ml cartridges. The printer ships with starter ink cartridges, and high-yield options reduce replacement frequency for high-volume printing. When you lease through us with ink included, you never pay for ink separately.
The HP DesignJet T2530 is a 36-inch wide-format MFP with a 600 dpi CIS scanner, designed for mid-to-large firms (10-40 seats), while the HP DesignJet HD Pro is a 44-inch MFP with a 1200 dpi CCD scanner, built for larger shops (15-75 seats). The HD Pro supports scanning rigid originals up to 15 mm thick and offers higher scan resolution (1200 dpi optical vs. 600 dpi), making it ideal for reprographics or scanning mounted boards. The T2530 is more compact and cost-effective for firms that don’t need 44-inch output or rigid-media scanning. For small offices, the T2530 is a better value if 36-inch output suffices.
The HP DesignJet T2530 is best suited for mid-to-large firms (10-40 seats) with high-volume CAD/GIS printing needs, producing up to 120 A1 plots per hour. Small businesses with lower print volumes may find it excessive, as it is designed for production-level output.
Yes, the HP DesignJet T2530 Multifunction Printer Series supports full-color printing using six inks (matte black, photo black, gray, cyan, magenta, yellow). It is ideal for CAD, GIS, and architectural work requiring high-quality color output. If you need alternatives, consider the HP DesignJet T2600 or HP DesignJet HD Pro for similar color capabilities.
Request a quote through the form on this page or call us at (386) 261-8323. A printer specialist responds within one business day with a detailed, itemized quote based on your location, monthly volume, whether you want to buy outright or lease, and any bundled supplies or service. Quotes are free and no obligation. We do not pull credit to issue a quote.
HP includes a 1-year limited manufacturer warranty on the HP DesignJet T2530 Multifunction Printer Series when purchased new from an authorized reseller. Smart Technologies is an authorized HP reseller. Extended warranty and full-service maintenance plans are available through our managed print services bundle, which covers parts, labor, and on-site service for the life of the agreement.
Yes. Free delivery is included on every HP DesignJet T2530 Multifunction Printer Series order shipped within the continental United States. Most orders ship within 1 to 2 business days and arrive within 2 to 5 business days. Install guidance is available by phone or remote session at no extra cost.

Ready to put this printer to work?

Request a free, no-obligation quote on the HP DesignJet T2530 Multifunction Printer Series. Lease, buy outright, or just order supplies. Quote in your inbox within one business day. Or call and talk to a specialist right now.

Get my free quote Or call (386) 261-8323