Ask an office manager what the company spends on printing and you’ll usually get the copier lease payment. Then you find the toner orders on a credit card, the inkjet cartridges somebody buys at the store on the way in, the printer under the receptionist’s desk that nobody remembers buying, and the reams of paper. Printing costs rarely sit on one invoice, which is why they’re easy to underestimate and fairly easy to cut.
This post is about lowering what you already spend, mostly without buying anything. If you’re about to buy or lease a new copier, our post on copy machine cost covers how to compare offers.
Start with what you actually have
You can’t cut what you can’t see, and the first step takes an afternoon:
- List every printing device. Copiers, desktop printers, the label printer, the old fax machine. Walk the office; there’s always one more than you think.
- Read the page counts. Every business copier and most network printers keep a running total of pages, usually split into black and color. Note it today and again in a month.
- Gather a year of supply spend. Toner, ink, paper, and any repair bills, including the ones on personal or company credit cards.
Divide the money by the pages and you have a cost per page for each device. The numbers are usually lopsided. A small inkjet printing a few hundred pages a month on expensive cartridges can cost more per page than anything else in the building, while the copier doing most of the work is the cheapest.
The most expensive pages in the office
Color nobody needed
A color page costs several times what a black one does on almost any machine. Internal drafts, emails and spreadsheets printed in color because that was the default are pure cost. The fix is a default, not a policy memo: set computers and printers to print black and white, and let people choose color when they need it.
Pages nobody collected
Walk past any shared printer at the end of the day and there’s a stack nobody came back for. Some get reprinted the next morning. Secure release (also called pull printing) holds each job until the person signs in at the device with a PIN or badge, so pages only come out when someone is standing there to take them. It also stops confidential pages sitting in the tray, which is often the reason offices turn it on in the first place.
Desktop printers
A personal printer on every desk is convenient and expensive. Small printers have the highest supply cost per page, each one needs its own toner or ink, and each one breaks on its own schedule. Most offices can retire a good share of them and send that printing to a shared machine down the hall, keeping a desktop printer only where there’s a real reason (confidential HR work, a front desk that prints receipts all day).
Inkjets doing an office’s work
Inkjets are fine for light use. For an office printing every day, laser printers usually cost less per page and cope better with volume. We explain the difference in do laser printers need ink?
Printing costs rarely sit on one invoice, which is why they’re easy to underestimate and fairly easy to cut.
Five settings to change this week
None of these cost anything:
- Two-sided by default. A ten-page document on one side uses ten sheets; on both sides it uses five. Set it in the printer driver on each computer and on the copier.
- Black and white by default. As above. People can still choose color.
- Secure release on shared machines, if your copier or print software supports it.
- Sleep settings. Copiers and printers draw power while idle. Make sure they go to sleep after a short time and that nobody has turned the setting off.
- Scan instead of copy. If the copy is going into a folder anyway, scan it to email or a shared folder instead. Most business copiers can do this in a couple of taps once it’s set up.
On energy: as of 2026, ENERGY STAR says certified printers, copiers and scanners use up to 35 percent less energy than conventional models, mostly while idle (ENERGY STAR, imaging equipment). That’s worth a look when you’re replacing a machine. Turning on the sleep setting on the one you have now costs nothing.
Buying supplies
Supplies bought one cartridge at a time, when the old one runs out, are usually the most expensive way to buy them, and you pay again in the time someone spends ordering and the hours a printer sits empty.
Third-party toner is cheaper per cartridge and sometimes works well. It can also leak, print faintly or coat the inside of the machine, and on a copier under a service agreement, damage caused by unapproved supplies may not be covered. If you use it, keep track of how it performs rather than assuming. We cover the trade-offs in finding the right compatible toner cartridge.
Fewer, better machines
Once you know the page counts, the right shape for the office usually becomes obvious: one or two shared multifunction copiers doing most of the work, a few printers where they’re genuinely needed, and nothing sitting idle on a lease or eating supplies. Fewer machines also means fewer supply orders, fewer service calls and fewer things to keep secure.
Get the size right too. A copier much bigger than your volume costs more every month for capacity you don’t use. One too small runs flat out and breaks down more often.
What we do about it
A no-obligation print assessment does the counting for you: we map every device, its page counts and what it costs, and tell you what we’d keep, change or retire. If you then move to a managed print agreement, we monitor the devices, ship toner before it runs out, and charge based on the pages you actually print, with parts, labor and maintenance supplies included. You supply the paper and staples. Call us at (386) 252-2292 to arrange the assessment.