← All posts
Print & DocumentCopier service

Copier Service in Palm Coast: What to Ask a Dealer

When the technician is a drive away, the details of the service agreement matter more than the machine.

A Palm Coast office that leases a copier is usually signing up for a few years of service from whoever sells it, and that dealer may well be based somewhere else. Ours is: we’re in Daytona Beach, about 30 minutes south. Thirty minutes is close enough that nobody should think twice about it, and far enough that a few things about service work differently than they would with a shop around the corner.

The drive itself is rarely the problem. The expensive part is a wasted trip: a technician arrives, finds the part that failed, doesn’t have it, and has to come back another day. Most of the questions below are about avoiding that second trip, or avoiding the first one altogether.

What changes when the technician drives in

With a dealer down the street, a vague service call costs little. Someone pops over, has a look and goes back for whatever is needed. From 30 minutes away, each visit is worth more, so the dealer’s job is to know as much as possible before anyone gets in the van.

That knowledge comes from three places: what the machine reports on its own, what your staff tell the person who answers the phone, and what the technician carries. A good service setup gets all three right. When one is missing, you feel it as days of a broken copier rather than hours.

The machine should report in on its own

Most business copiers can send their status to the dealer over the internet. Ricoh’s version is called @Remote, and Ricoh’s own description says it automates meter reads, sends maintenance alerts to your service provider to speed up repairs, and gives notice when supplies need reordering. Ricoh also notes that which of these services you get depends partly on the service provider, so ask what yours actually switches on.

For an office half an hour from its dealer, this matters a lot. Toner can ship before it runs out instead of someone noticing on a Friday afternoon. A fault code can reach the dealer before you call, so the technician knows which part to bring. And page counts are read automatically, so nobody has to walk to the copier and phone in numbers at the end of the month.

If a dealer tells you the machine will be monitored, ask to see what they see. It should be a list of your devices with toner levels, page counts and recent alerts, not a promise.

The expensive part is a wasted trip.

Six questions to ask a dealer that isn’t in town

Who covers Flagler County?

Ask where the technicians who would come to you are based, and whether the dealer sends its own people or subcontracts service to another company. A dealer that hands Palm Coast to a third party is a different arrangement from one whose own technicians work the area, and it’s fair to know which you’re getting before you sign.

How are parts handled?

Ask which common parts technicians carry, and how quickly anything else can be got hold of. Rollers, fuser units and similar wear items are the usual suspects. If the answer to “what happens when you don’t have the part” is vague, expect some second trips.

What gets fixed without a visit?

Plenty of copier problems are settings, not hardware: scan-to-email stops working after a password change, a computer loses the print driver, a tray is set to the wrong paper size. Ask whether the dealer can connect remotely to sort these out, and who on their side does it.

Where does toner come from, and how do empties go back?

Supplies should ship automatically based on what the machine reports. Ask where they ship from, who pays for shipping, and what you do with empty cartridges and full waste toner containers.

Who answers the phone?

When the copier jams on a deadline, you want a person who can look up your machine and its history, not a general call center. Ask what number you’ll call, who picks up, and what they can do from their desk.

What happens if the copier is down for longer?

Sometimes a repair takes days, for a part on back order or a bigger failure. Ask how the dealer handles that, and in the meantime keep at least one desktop printer in the office that can carry the urgent printing.

Delivery and setup

A copier is big, heavy and awkward. Before delivery day, measure the route from the parking lot to where the machine will stand: doorways, hallway corners, any steps, and the elevator if you’re upstairs. Ask whether the dealer delivers with its own people and truck or sends the machine with a freight carrier, and whether the same visit includes unpacking, setup and connecting it to your network.

Setup is where scan-to-email, scan-to-folder and user codes get configured, so have someone from the office there who knows how people want to use it. And if an old machine is going out the same day, get in writing who removes it and who wipes or destroys its hard drive, which stores copies of documents.

Make the visits count

A few habits help any copier, and help more when the technician has a drive:

  • Write down error codes before switching the machine off and on. The code is often what tells the dealer which part to bring.
  • Name one person as the copier contact, so the dealer always gets the same clear description.
  • Keep paper sealed in its wrapper until it goes in the tray. Paper that has picked up humidity curls and jams, and the coast has no shortage of humidity.
  • Unplug before a storm. If the office closes for weather, switch the copier off and unplug it with the computers. Our hurricane checklist for Palm Coast offices covers the rest of the building.

For what your staff can safely do themselves and what to leave to a technician, see our guide to copier maintenance.

How we look after Palm Coast copiers

Smart Technologies has served Palm Coast businesses for more than 25 years, since we opened in July 2000. Copiers and printers in Palm Coast and the rest of Flagler County are looked after by the technicians at our Daytona Beach office, and we deliver on our own box truck. We sell and support Ricoh, HP, Brother and Epson. Under a managed print agreement we monitor your machines remotely, ship toner before it runs out and cover parts, labor and maintenance supplies; you supply the paper and staples. If you’re choosing a new machine, start with our copiers and printers page, read how we cover the area on our Palm Coast page, or call (386) 252-2292 and request a quote.

More on Print & Document

Let's build your foundation.

Tell us where your business is today and we'll help map the next step.